Services

Trailer Repair:

• Trailer Bearing Pack: Tear down hub, HUB/DRUM, pack bearings, test brake magnets, replace bearings/seals as necessary. Any problems found will be additional cost and estimated prior to complete upon request, with our 12-point inspection, focusing on  legalty and safety
• DOT Trailer Inspection: Inspect trailer to ensure it is DOT legal upon completion of inspection. Problems identified will be additional cost and estimated prior to complete upon request. We provide many customized services on trailers. If you don’t see it listed above, please call us. If we can’t do it, we generally know who does!
• Brake Control Installation: Install brake controller of your choice to the plug of your choice. All wiring is expertly installed to ensure no impact to the appearance of your vehicle as well as to ensure that it will last.
• Wiring: Trace and repair any wiring/lighting problems to include ground problems, broken lights, replace plugs, install converters and modulites and complete re-wiring jobs.
• Gooseneck Hitch Installation: Atwood Flipover ball or B&W hitch installation. Additional charges for bedliners, toppers and wiring of an additional plug.
• 5th Wheel Hitch Installation: Installation of Draw-tite, Curt or your own hitch. Additional charges for bedliners, toppers and wiring of an additional plug.
• Welding: Trailer customization and equipment rack holders.
• Class I-IV Hitch Installation: Installation of fit-specific hitches.

Small Engine Repair

• Trimmer & Blower Tune-up: Change Oil. Change gas, spark plug and air filter as necessary. Ensure proper and safe operating condition.
• Mower Tune-up (21″): Change oil. Change gas, spark plug, air filter, oil filter as necessary. Sharpen blade. Ensure proper and safe operating condition and wash unit.
• Deckmower Tune-up: Change oil. Change gas, spark plug, air filter, oil filter, hydro filter, hydro oil as necessary. Sharpen blade(s). Ensure proper and safe operating condition and wash unit.
• Tractor & Mid-size Riding Commercial Mower Tune-up: Change oil. Change gas, spark plug, air filter, oil filter, hydro filter, hydro oil as necessary. Sharpen blade(s). Ensure proper and safe operating condition and wash unit.
• Valve Job: Reface valve and adjust to ensure proper operating RPM.
• Starter Rebuild: Replace recoil rope or any internal parts.
• Carburetor Rebuild: Tear down carburetor, clean and rebuild as needed. Units may or may not require a carb kit.
• Blade Sharpening
• Hedge Trimmer Sharpening
• Straighten Crank Shaft: Depending upon severity of the bend, this service can not be guaranteed.